China CNC Pipe Threading Lathe Machine Suppliers – YUNNAN Conventional Lathe CY6150B CY6166B CY6176L – Maiouke
China CNC Pipe Threading Lathe Machine Suppliers – YUNNAN Conventional Lathe CY6150B CY6166B CY6176L – Maiouke Detail:
Characteristic
●The headstock gearbox, block and bed guide are all made of high quality cast iron, all of which are cast by resin sand casting technology and aging process. The bed guide is inductively quenched, and the hardness is around HRC52.
●The spindle is supported by three-point high-precision bearings, and all gears on the headstock are precision ground to make the spindle very smooth when rotating at high speed. High rigidity spindle system with absolute temperature not higher than 35*C.
●Rapid feed system to improve efficiency. Wide range of feed and pitch are available without changing gears, distance between centers 1000 – 5000mm, this lathe covers wide range of working pieces.
●When rapid feeding is on, the tool slide longitudinal travel hand-wheel will be automatically disfunctioned.
●Reliable safety devices, such as foot brakes and emergency power-off switches, are installed. An adjustable overload protection device is also installed in the feed system.
●The tool holder is of ratchet pawl construction and can be re-locked with only half a turn of the lever.
●The tailstock is equipped with a double locking mechanism and an elastic rolling device underneath ensures smooth and effortless movement.
|
item |
unit |
CY6150 |
CY6166 |
CY6176L |
|||||
|
A |
B |
L |
B |
L |
|||||
|
swing over bed |
mm |
500 |
660 |
760 |
|||||
|
swing over cross slide |
mm |
300 |
430 |
530 |
|||||
|
Dis. between centers |
mm |
1000/1500/2000/3000mm |
|||||||
|
spindle nose |
C6 |
D8 |
|||||||
|
Stander 3-jaw chuck |
K11250C/C6 |
K11250C/D8 |
K11325C/D8 |
K11325C/D8 |
K11325C /D8 |
||||
|
Spindle diameter |
mm |
52 |
82 |
105 |
82 |
105 |
105 |
||
|
spindle speed |
rpm |
9-1600 24steps |
9-1600 (24step) |
6-1120 (24steps) |
9-1600 (24steps) |
6-1120 (24steps) |
6-1120 (24steps) |
||
|
Spindle max output torque(30mins) |
N.M |
1400 |
2000 |
2000 |
|||||
|
range of longitudinal feed |
mm/rev |
0-028- 6.43 |
0-028- 6.43 |
0.063- 6.43 |
0-028- 6.43 |
0.063- 6.43 |
0.063- 6.43 |
||
|
range of cross feed |
mm/rev |
0.012- 2.73 |
0.012- 2.73 |
0.012- 2.73 |
0.012- 2.73 |
0.012- 2.73 |
0.012- 2.73 |
||
|
metric threads |
mm |
0.5-224(48kinds) |
0.5-224(48kinds) |
1-224 (48kinds) |
0.5-224(48kinds) |
1-224 (48kinds) |
1-224 (48kinds) |
||
|
Inch system threads |
T.p.i | 72-1/8in(46kinds) | 72-1/8in(46kinds) | 28-1/8in(42kinds) | 72-1/8in(46kinds) | 28-1/8in(42kinds) | 28-1/8in(42kinds) | ||
|
module threads |
0.5-112(42kinds) |
||||||||
|
Dia.pitch threads |
Dp |
56-1/4(45kinds) |
|||||||
|
Main motor |
kw |
7.5 |
7.5 |
11 |
11 |
||||
|
cross slide travel |
mm |
340 |
370 |
||||||
|
Top silde travel |
mm |
145 |
200 |
||||||
|
longitudinal rapid traveling speed |
m/min |
4.5 |
4.5 |
||||||
|
transversal rapid traveling speed |
m/ min |
1.9 |
1.9 |
||||||
|
tailstock quill diameter |
mm |
75 |
75 |
||||||
|
Max travel of tailstock quill |
mm |
150 |
150 |
||||||
|
Taper of tailstock spindle |
M5 |
M5 |
|||||||
|
Cutter size |
mm |
25*25 |
25*25 |
||||||
|
Machine size |
mm |
2500/3000/3500/4500*1150*1300 |
2500/3000/3500/4500*1250*1400(76L:+100 on height) |
||||||
|
Net/gross weight |
kg |
2540/2100 2860/2400 3200/2800 4000/3800 |
2800/2200 3000/2500 3400/2900 4200/3400(76L:+100 on both) |
||||||
|
Wroking roundness |
0.01 |
||||||||
|
Working cylindricity |
0.04/300 |
||||||||
|
Working flatness |
0.025/Φ300 |
||||||||
|
Accuracy stander |
GB/T4020-1997 |
||||||||
Stander Configuration
1. 250mm 3-jaw chuck for 50B,50L series;325mm 3-jaw chuck for 66B, 66L, 76L series
2. Thread chasing dial
3. Chip guard for L≤2m lathe,follow chip guard for L≤3m lathe
4. Foot brake
5. Oil gun
6. Live center 5#
7. Center 5#
8. Center sleeve
Optional Configuration
1. 630mm Face plate for 50 series
800mm Face plate for 66, 76 series
2. 400mm 4-jaw chuck
3. 20-140mm Small steady rest
4. 130-260mm Large steady rest
5. 2680mm Follow rest
6. 250mm Drive plate
7. 4-position stop for saddle
8. 4-position stop for cross slide
9. Micro stop for saddle
10. Quick change tool post
11. Damping washer
12. Taper turning attachment(TTA)
13. Halogen work lamp
14. Digital readout(DRO)
15. CE standard compliance
16. Chuck cover
Product detail pictures:
Related Product Guide:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for China CNC Pipe Threading Lathe Machine Suppliers – YUNNAN Conventional Lathe CY6150B CY6166B CY6176L – Maiouke , The product will supply to all over the world, such as: Guinea, Vancouver, Madrid, We solution have passed through the national skilled certification and been well received in our key industry. Our specialist engineering team will often be ready to serve you for consultation and feedback. We've been able to also provide you with no cost samples to meet your needs. Best efforts are going to be produced to supply you the very best service and solutions. For anyone who is considering our business and solutions, please speak to us by sending us emails or get in touch with us right away. As a way to know our items and enterprise. lot more, you'll be able to come to our factory to find out it. We'll constantly welcome guests from around the globe to our firm. o build enterprise. elations with us. You should really feel absolutely free to make contact with us for small business and we believe we'll share the top trading practical experience with all our merchants.
By Doris from Lesotho - 2017.02.28 14:19
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Agatha from Botswana - 2018.10.09 19:07
