YUNNAN Slant Bed CNC Lathe CY-K55 – YUNNAN Vertical Machining Center V6 V8 V85 V10 – Maiouke

YUNNAN Vertical machining centers V6 V8 V85 V10

Characteristic

•The tool magazine support and column are cast in one piece, which eliminates the influence of the tool magazine on the vertical accuracy and improves the accuracy retention of the machine tool
•The table is optimized in gateway structure, and the thickness is thickened to 130mm, which improves the rigidity and accuracy retention
•The sliding saddle adopts multi-layer gateway structure, which improves the rigidity, compression resistance and bending resistance
•The oversized widened base improves the stability of the machine tool. Equipped with large-scale circular water tank, it can be equipped with spiral chip conveyor, which can greatly prevent the leakage of chip liquid
•Z-axis adopts large torque motor for fast response
•The main shaft adopts a short nose structure, and the speed reaches 10000rpm. The continuous processing does not need to be equipped with an oil cooler, which reduces the user’s use cost and reduces the equipment failure rate.
•The three axis are equipped with 4016 imported ball screws, with a fast moving speed of 48m/min, which effectively improves the processing efficiency. Large stroke 800*550*550mm with large linear guiideway
The three axes are equipped with imported roller guideway of 35/45/45 specifications, and the Z axis adopts the design of double-sided six slide blocks to increase the bearing capacity of the machine tool and chip rigidity.