Product Detail
Product Tags
| Item |
Unit |
Parameter |
| Spindle max. swing diameter |
Φ |
550 |
| Spindle max. machining diameter |
mm |
350 |
| Spindle Max. bar passing capacity |
Φ |
52 |
| X-axis travel |
mm |
230 |
| Z-axis travel |
mm |
500 |
| Y-axis travel |
mm |
±50 |
| Sub-spindle travel |
mm |
500 |
| Max. distance from spindle nose to ground |
mm |
800 |
| Feed |
|
|
| X-axis cutting feed rate |
m/min |
30 |
| Z-axis cutting feed rate |
m/min |
30 |
| Y-axis cutting feed rate |
m/min |
10 |
| X-axis acceleration |
m/s² |
10 |
| Z axis acceleration |
m/s² |
10 |
| Y-axis acceleration |
m/s² |
10 |
| Y-axis acceleration |
m/s² |
30 |
| Precision |
|
|
| Positioning accuracy X/Z (Y) |
mm |
0.008 |
| Repeatability X/Z (Y) |
mm |
0.002 |
| Grating ruler |
|
|
| X-axis grating ruler |
0.001mm absolute |
Nidec |
| Z-axis grating ruler |
0.001mm absolute |
Nidec |
| Main motor |
|
|
| type |
|
servo motor |
| Maximum speed |
Rpm |
4300 |
| Maximum power |
mw |
15 (2:1 reduction ratio) |
| cooling method |
|
air cooled |
| Positioning method |
|
Encoder |
| Spindle and chuck system |
|
|
| Spindle specification |
type |
A2-6 |
| Chuck through hole |
Φ |
65 |
| Chuck size |
In |
8 inch |
| Chuck clamping method |
N/m |
hydraulic clamping |
| Max. speed |
Rpm |
4500 |
| Bearing lubrication method |
|
oil |
| Arrange by |
|
3 in front, 2 in back |
| Front bearing protection method |
|
air maze protection |
| Spindle motor |
kw |
11 (2:1 reduction ratio) |
| Sub spindle and chuck system |
|
|
| Spindle specification |
type |
A2-5 |
| Spindle through hole |
Φ |
42 |
| Chuck model |
In |
5 |
| Sub spindle motor |
Kw |
7.5 |
| Servo Turret System |
|
|
| Number of turret tools |
Pockets |
12 |
| Tool change method |
|
Servo motor drive |
| Turret form |
BMT |
BMT-55 |
| Tool selection method |
|
best path selection |
| Max. tool diameter (full tool) |
mm |
25X25 |
| Maximum tool length |
mm |
200 |
| Maximum tool weight |
kg |
5 |
| Tool – Tool Change Time (T to T) |
sec |
0.8 |
| Chips – Chip change time (C to C) |
sec |
0.8 |
| End Face turning tool holder 25×25 |
mm |
4 |
| cover plate |
mm |
4 |
| H Type Milling Drill Holder (Driven Tool) |
mm |
1 |
| V-Type Milling Drill Holder (Driven Tool) |
mm |
1 |
| Outer circle turning tool holder 25×25 |
mm |
3 |
| Boring tool holder Φ 40 |
mm |
2 |
| Boring tool sleeve Φ 32xΦ 40 |
mm |
1 |
| Boring tool sleeve Φ 32xΦ 40 |
mm |
1 |
| central lubrication system |
|
|
| Pump type |
|
pressure relief |
| motor |
|
Shield type AC110/220V 2P 100W |
| electric current |
A |
2 |
| capacity |
L |
2 |
| control method |
|
PLC |
| Oil injection interval time |
Min |
30 |
| Saturation time |
Sec |
3 |
| pressure detection |
|
15bar ON / 12bar OFF |
| Liquid Level Switch |
|
0.2L ON |
| Distributor type |
|
volumetric |
| Dispenser output |
cc |
0.3 |
| Cutting Cooling System |
|
|
| Pump |
w |
180 |
| flow |
L/min |
135 |
| lift |
M |
38 |
| tank capacity |
L |
250 |
| Mechanical parameters |
|
|
| X-axis roller track size |
mm |
35 |
| Z axis roller track size |
mm |
35 |
| Y-axis roller track size |
mm |
35 |
| X-axis ball screw size |
Φ |
32 |
| Z axis ball screw size |
Φ |
36 |
| Y-axis ball screw size |
Φ |
32 |
| X-axis ball screw lead |
mm |
12 |
| Z axis ball screw lead |
mm |
16 |
| Y-axis ball screw lead |
mm |
10 |
| Machine weight (approx.) |
kg |
7500 |
