China CY-S2040B High Speed Precision Lathe Supplier – YUNNAN Conventional Lathe CY6150B CY6166B CY6176L – Maiouke

Product Detail

Product Tags

Feedback (2)

We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for Pipe Threading Lathe, Pipe Threading Lathe Machine, Nut Forging Machine, First company, we understand each other. Further more company, the trust is getting there. Our enterprise normally at your provider anytime.

China CY-S2040B High Speed Precision Lathe Supplier – YUNNAN Conventional Lathe CY6150B CY6166B CY6176L – Maiouke Detail:

Characteristic

●The headstock gearbox, block and bed guide are all made of high quality cast iron, all of which are cast by resin sand casting technology and aging process. The bed guide is inductively quenched, and the hardness is around HRC52.
●The spindle is supported by three-point high-precision bearings, and all gears on the headstock are precision ground to make the spindle very smooth when rotating at high speed. High rigidity spindle system with absolute temperature not higher than 35*C.
●Rapid feed system to improve efficiency. Wide range of feed and pitch are available without changing gears, distance between centers 1000 – 5000mm, this lathe covers wide range of working pieces.
●When rapid feeding is on, the tool slide longitudinal travel hand-wheel will be automatically disfunctioned.
●Reliable safety devices, such as foot brakes and emergency power-off switches, are installed. An adjustable overload protection device is also installed in the feed system.
●The tool holder is of ratchet pawl construction and can be re-locked with only half a turn of the lever.
●The tailstock is equipped with a double locking mechanism and an elastic rolling device underneath ensures smooth and effortless movement.

item	unit	CY6150			CY6166			CY6176L
		A	B	L	B		L
swing over bed	mm	500			660			760
swing over cross slide	mm	300			430			530
Dis. between centers	mm	1000/1500/2000/3000mm
spindle nose		C6	D8
Stander 3-jaw chuck		K11250C/C6	K11250C/D8	K11325C/D8		K11325C/D8			K11325C /D8
Spindle diameter	mm	52	82	105	82		105	105
spindle speed	rpm	9-1600 24steps	9-1600 (24step)	6-1120 (24steps)	9-1600 (24steps)		6-1120 (24steps)	6-1120 (24steps)
Spindle max output torque(30mins)	N.M	1400		2000		2000
range of longitudinal feed	mm/rev	0-028- 6.43	0-028- 6.43	0.063- 6.43	0-028- 6.43		0.063- 6.43	0.063- 6.43
range of cross feed	mm/rev	0.012- 2.73	0.012- 2.73	0.012- 2.73	0.012- 2.73		0.012- 2.73	0.012- 2.73
metric threads	mm	0.5-224(48kinds)	0.5-224(48kinds)	1-224 (48kinds)	0.5-224(48kinds)		1-224 (48kinds)	1-224 (48kinds)
Inch system threads	T.p.i	72-1/8in(46kinds)	72-1/8in(46kinds)	28-1/8in(42kinds)	72-1/8in(46kinds)		28-1/8in(42kinds)	28-1/8in(42kinds)
module threads		0.5-112(42kinds)
Dia.pitch threads	Dp	56-1/4(45kinds)
Main motor	kw	7.5	7.5	11	11
cross slide travel	mm	340			370
Top silde travel	mm	145			200
longitudinal rapid traveling speed	m/min	4.5			4.5
transversal rapid traveling speed	m/ min	1.9			1.9
tailstock quill diameter	mm	75			75
Max travel of tailstock quill	mm	150			150
Taper of tailstock spindle		M5			M5
Cutter size	mm	25*25			25*25
Machine size	mm	2500/3000/3500/450011501300			2500/3000/3500/450012501400(76L:+100 on height)
Net/gross weight	kg	2540/2100 2860/2400 3200/2800 4000/3800			2800/2200 3000/2500 3400/2900 4200/3400(76L:+100 on both)
Wroking roundness		0.01
Working cylindricity		0.04/300
Working flatness		0.025/Φ300
Accuracy stander	GB/T4020-1997

Stander Configuration

1. 250mm 3-jaw chuck for 50B,50L series;325mm 3-jaw chuck for 66B, 66L, 76L series
2. Thread chasing dial
3. Chip guard for L≤2m lathe,follow chip guard for L≤3m lathe
4. Foot brake
5. Oil gun
6. Live center 5#
7. Center 5#
8. Center sleeve

Optional Configuration

1. 630mm Face plate for 50 series
800mm Face plate for 66, 76 series
2. 400mm 4-jaw chuck
3. 20-140mm Small steady rest
4. 130-260mm Large steady rest
5. 2680mm Follow rest
6. 250mm Drive plate
7. 4-position stop for saddle
8. 4-position stop for cross slide
9. Micro stop for saddle
10. Quick change tool post
11. Damping washer
12. Taper turning attachment(TTA)
13. Halogen work lamp
14. Digital readout(DRO)
15. CE standard compliance
16. Chuck cover

Product detail pictures:

Related Product Guide:

With a positive and progressive attitude to customer's curiosity, our organization repeatedly improves our products top quality to meet the wants of consumers and further focuses on safety, reliability, environmental necessities, and innovation of China CY-S2040B High Speed Precision Lathe Supplier – YUNNAN Conventional Lathe CY6150B CY6166B CY6176L – Maiouke , The product will supply to all over the world, such as: Yemen, Morocco, Madras, Excellent quality comes from our adherence to every detail, and customer satisfaction comes from our sincere dedication. Relying on advanced technology and industry reputation of good cooperation, we try our best to provide more quality products and services to our customers, and all of us are willing to strengthen exchanges with domestic and foreign customers and sincere cooperation, to build a better future.

Cnc Flat Bed Lathe

CY-L1630G Gap Bed Lathe

Cy6266b Lathe

Cy6276L lathe

Manual Lathe

Pipe Threading Lathe

The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.